To Calculate shipping cost:
Add items into the shopping cart.
Go to VIEW SHOPPING CART,
In the shopping cart you will see a place for shipping.
Put your state and zip code into the box and press calculate.
If it gives you an error just give us a call and we can help you out
(1) 7,000 lbs. Electric Brake Trailer Axle 8 lug
(2) 5 leaf 2” wide Slipper springs
(1) 3” U-bolt kit (1 kit per axle)
Axle Specs & Features:
Capacity per Axle: 7,000 lbs
Axle hub Drum - 8 Lug on 8x6.5" bolt pattern
Brakes: 12” x 2” Electric Brake (auto adjusting)
Axle Beam - 3" Tube 1/4" wall thickness
Axle Hub Cap - Fast Lube Grease (EZ-Lube)
Axle Studs - 9/16"
Brakes- Self Adjusting electric brakes
Replaces Dexter, AL-KO, Hayes, Lippert Axles, Rockwell American, and Just about any other brand axle.
Axles come fully assembled with slipper leaf springs attached on axle
Axles are pre-wired in the axle tube.
Packed with High-Temp Axle Grease.
Fast Lube Design.
Zerk fitting on the spindle uses a rubber plug on the hub cap to grease bearings simply.
Grease your axle without pulling off your whole entire hub.
Underslung – Axle is welded with spring seats on the bottom (Axle sits on top of the springs)
which Allows for lower ride height. For optimal usage, use with double eye springs
High Strength Cambered Steel Axle Tube Construction to ensure Even Tire Wear so the tires will last longer.
Slipper Spring Specifications:
5 Leaf 2" Wide Slipper Spring 3.5k Cap. 26-7/8" Free Length
Measures 2" wide and 26-7/8" long from eye to end.
Spring Type: Slipper Spring
Capacity per spring: 3,500 lbs
Eye Dimension: 9/16"
Arch Height: 3"-3.25"
Spring Eye size: 9/16"
3" U-Bolt kit Includes:
(4) 1/2"-20 x 6.63" L 3" Tube U-bolts.
(8) 1/2"-20 U-bolt nuts.
(2) Tie Plates for 3" Wide Axle Tubing u bolts.
This Kit is all the u-bolts and hardware for one complete axle.
How to properly measure your axle:
Hub Face (HF):
measure from one end of the axle where the lug bolts protrude out from to the other end at the same point. This is the Hub Face.
Spring Center (SC):
Measure from the middle of the spring on one axle to the center of the other spring on the same axle.
There should be about a 15" difference between the Hub Face and the Spring Center measurement. (7-1/2" each side)
How To Measure Your Bolt Pattern:
This item ships on a pallet with a common freight carrier. Please see the shipping policy for more info.
We offer discounts for bulk orders and manufacturing discounts.