(1) 5,200 lb Trailer Axle with 6 lug idler hubs installed on axles
(2) 5 leaf 1-¾” wide double eye springs
(1) 3” U-bolt kit (1 kit per axle)
(1) Single axle hanger kit (includes all the weld on hangers,spring bolts and nuts.)
(2) 16” ST235/80R16 12-Ply LRF Trailer Tires Mounted on Silver Mod 6 Lug Wheels
Select from the options above to get what you need today. If you do not see the option you need, give us a call, or fill out a custom axle order form, email or fax it to us for a quote.
Axle Brand: Rockwell American
Axle hub Drum - 6 lug 5.5" bolt pattern
Brakes: Idler Hubs (No Brakes)
Flange: 5 Bolt Welded on Axle (incase you want to install brakes in the future)
Axle Beam - 3" Tube .191" wall thickness
Axle Hub Cap - Posi Lube Grease (EZ-Lube)
Axle Studs - 1/2"
Replaces Dexter, AL-KO, Hayes,Lippert Axles, and Just about any other brand axle.
Axles come fully assembled
Axles are pre-wired in axle tube.
Packed with High-Temp Axle Grease.
Posi-Lube / EZ-Lube Design.
Zerk fitting on spindle use rubber plug on the hub cap to grease bearings simply.
Grease your axle without pulling off your whole entire hub.
Underslung – Axle is welded with spring seats on the bottom (Axle sits on top of the springs)
which Allows for lower ride height. For optimal usage, use with double eye springs
High Strength Cambered Steel Axle Tube Construction to ensure Even Tire Wear so the tires will last longer.
Powder coated black.
Tire Size: ST235/80R16
Load Index: 127/122
Speed Rating: L
Ply Rating: 12
Load Range: F
Max Load Per Tire: 3,860 lbs
Max Air Pressure (PSI): lbs
Tread Depth: 7.6
Tread Design: WR078
Section Width: 9.3”
Overall Diameter: 30.6”
Wheel Size: 16” x 6”
Center Bore Hole (Pilot Hole): 4.25”
Wheel Material: Steel
Bolt Pattern: 6x5.5”
Wheel Color/Style: Silver Mod
Tire Comes Mounted and Balanced (from manufacture) Ready to install on your trailer.
3000 lb. capacity double eye leaf spring.
Measures 1-3/4" wide and 25.25" long from eye to eye.
Spring Type: Double Eye Leaf Spring
Capacity per spring: 3,000 lbs
Dimensions: 25.25" Long, 1.75" Wide
Spring length eye to eye: 25-1/4"
Spring width: 1-3/4"
Eye Dimension: 9/16"
Arch Height: 3"-3.25"
Spring Eye size: 9/16"
Single Hanger Kit Specs:
(2) 1.44" Tall front hangers,
(2) 1.5" Tall Rear Hangers with bushing,
(4) 3 1/8" Shackle Links
6- Shackle Bolts
6- Lock Nuts
(4) 1/2"-20 x 6.63" L 3" Tube U-bolts.
(8) 1/2"-20 U-bolt nuts.
(2) Tie Plates for 3" Wide Axle Tubing u bolts.
This Kit is all the u-bolts and hardware for one complete axle.
How to properly measure your axle:
Hub Face (HF):
measure from one end of the axle where the lug bolts protrude out from to the other end at the same point. This is the Hub Face.
Spring Center (SC):
Measure from the middle of the spring on one axle to the center of the other spring on the same axle.
There should be about 15" difference between the Hub Face and the Spring Center measurement. (7-1/2" each side
How To Measure Your Bolt Pattern: