Thinking about building a trailer? Need to replace the axles tires and wheels on your current trailer? Check out this 3.5k Tandem Trailer Axle Tire Wheel Kit. This trailer kit comes with two 3500 lbs idler axles, four 15” 6ply radial tires and wheels, four double eye springs, two u bolt kits, and a tandem trailer axle hanger kit. This kit provides all necessary parts to replace your trailer axles, trailer suspension, and trailer tires and wheels.
Select from the options above to get what you need today. If you do not see the option you need, give us a call, or fill out a custom axle order form, email or fax it to us for a quote.
This kit includes:
(2) 3500 lbs axle with 5 lug idler hubs
(4) 4 leaf double eye springs.
(2) U-bolt kits.
(1) Tandem Axle Hanger Kit.
(4) 15” 6-Ply Radial Trailer Tire Silver Mod wheel combos
Kit comes with all necessary hardware to install both axles on your trailer.
Axle Brand: Rockwell American
Country Assembled: The U.S.A.
Capacity Per Axle (LBS): 3,500
Stud Size: 1/2"
Hubs/drums: 5 Lug Drums
Spindle Size: 1-1/16"
Axle Tubing Diameter (Inch): 2 3/8"
Axle Tubing Thickness: .180"
Lubrication: EZ-Grease Zerks in Spindles
Spring Pads: Welded on Axle
Brake: no brakes
Brake Flange: 4 Bolt Welded on Axle
Inner Bearing: L68149
Outer Bearing: L44649
Suspension: Leaf Spring
Underslung: Yes (the axle sits on top of the springs)
FULLY ASSEMBLED, READY TO INSTALL ON TRAILER.
Axle Beam Acts as part of your trailer Suspension for hauling loads.
Great for replacing an old axle or bent damaged axle on your trailer
Made of High Strength Steel
Under slung axle design: spring pads are welded to the underside of the axle for mounting leaf springs.
Spring pads are pre-welded on the trailer axle for your convenience.
The 5 lug idler hubs are pre assembled on both axles with the bearings, seals, pre-greased, fully assembled for simple installation on your trailer.
Limited 2-year warranty
refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle
(when hubs are mounted on the beam).
is the approximate width of your trailer. It is measured from the center of the spring seat on one side of the axle to the center of the seat on the other.
This axle beam comes with the spring seats welded on.
Use the distance between the center of one bolt hole to the center of the bolt hole adjacent to it:
If the distance is:
2-5/8" - the bolt pattern is 5 on 4-1/2
2-3/4" - the bolt pattern is 5 on 4-3/4
3" - the bolt pattern is 5 on 5
3-1/4" - the bolt pattern is 5 on 5-½
Tire Size: ST205/75R15
Load Index: 101/97
Speed Rating: L
Ply Rating: 6
Load Range: C
Max Load Per Tire: 1,820 lbs
Max Air Pressure (PSI): 50 lbs
Tread Depth: 6.5
Tread Design: WR078
Section Width: 8.2”
Overall Diameter: 26.9”
Wheel Size: 15" x 5"
Center Bore Hole: 3.19"
Max Load Per Wheel: 1,870 lbs
Wheel Material: Steel
Tire comes Mounted & Balanced (by manufacture) on Wheel, aired up ready to install on your trailer.
4 Leaf 1-3/4" Wide Double Eye Spring 1.75k Cap. 25-1/4" Eye to Eye.
Spring Type: Double Eye
Capacity per spring: 1,750 lbs
Dimensions: 25.25" Length x 1.75" Height
Eye Dimension: 9/16"
Arch Height: 3.25"
This Trailer Axle Spring is the most commonly used leaf spring on 3.5k axles.
90% of trailer manufacturers use this spring when building light-duty utility trailers.
3.5K U-Bolt Kit for 2-3/8" Round Tubing Axles 3500 lb axles
1 U-Bolt Kit includes all the u-bolts, nuts and tie plates for one axle.
(4) 7/16"-20 x 2-3/8" x 5-1/2" U-Bolts
(2) Tie Plates for 1-3/4" wide Double Eye leaf springs
(2) EQ-E1 equalizers, 9 inches overall
(6) 3" tall hangers
(8) shackle straps
(14) 9/16"-18 x 3" long shackle bolts
(14) 9/16"-18 lock nuts