Product Description
Then click on the cart icon, in the shopping cart you will see a place that says shipping.
Click on it, a drop-down menu will pop out. Please put your zip code and state in and press calculate.
This will show you the shipping charge before you actually have to pay.
Kit includes:
(1) 6,000 lb Electric Brake Drum Trailer Axle 6 Lug
(2) 5 leaf 1-¾” wide double eye springs
(1) 3” U-bolt kit (1 kit per axle)
(1) Single axle hanger kit (includes all the weld on hangers, spring bolts, and nuts.)
Select from the options above to get what you need today. If you do not see the option you need, give us a call, or fill out a custom axle order form, email or fax it to us for a quote.
Axle Specs & Features:
Axle Brand: Trailer Parts Unlimited
Axle hub Drum - 6 lug 5.5" bolt pattern
Brakes: 12” x 2” Electric Brake
Axle Beam - 3" Tube .250 wall thickness
Axle Hub Cap - Fast Lube Grease
Axle Studs - 1/2"
Replaces Dexter, AL-KO, Hayes, Lippert Axles, Rockwell American, and Just about any other brand axle.
Axles come fully assembled
Axles are pre-wired in the axle tube.
Packed with High-Temp Axle Grease.
Fast lube Design.
Zerk fitting on the spindle uses a rubber plug on the hub cap to grease bearings simply.
Grease your axle without pulling off your whole entire hub.
Underslung – Axle is welded with spring seats on the bottom (Axle sits on top of the springs)
which Allows for lower ride height. For optimal usage, use with double eye springs
High Strength Cambered Steel Axle Tube Construction to ensure Even Tire Wear so the tires will last longer.
Powder-coated black.
3" diameter x 1/4" wall round tubing
Spindle
Type 42 with an inner journal dimension of 1-3/4" and an outer journal dimension of 1-1/4"
Bearings
Inner Bearing - 25580
Outer Bearing - 15123
Inner Race - 25520
Outer Race - 15245
Double Eye Spring Specifications:
3000 lb. capacity double eye leaf spring.
Measures 1-3/4" wide and 25.25" long from eye to eye.
Spring Type: Double Eye
Capacity per spring: 3,000 lbs
Leaves: 5
Dimensions: 25.25" Long, 1.75" Wide
Spring length eye to eye: 25-1/4"
Spring width: 1-3/4"
Eye Dimension: 9/16"
Arch Height: 3"-3.25"
Spring Eye size: 9/16"
Single Hanger Kit Specs:
Includes
(2) 1.44" Tall front hangers,
(2) 1.5" Tall Rear Hangers with bushing,
(4) 3 1/8" Shackle Links
6- Shackle Bolts
6- Lock Nuts
(4) 1/2"-20 x 6.63" L 3" Tube U-bolts.
(8) 1/2"-20 U-bolt nuts.
(2) Tie Plates for 3" Wide Axle Tubing u bolts.
This Kit is all the u-bolts and hardware for one complete axle.
How to properly measure your axle:
Hub Face (HF):
measure from one end of the axle where the lug bolts protrude out from to the other end at the same point. This is the Hub Face.
Spring Center (SC):
Measure from the middle of the spring on one axle to the center of the other spring on the same axle.
There should be about 15" difference between the Hub Face and the Spring Center measurement. (7-1/2" each side
How To Measure Your Bolt Pattern:
