Product Description
To calculate shipping,
please put items needed into cart.
Then click on the cart icon, in the shopping cart you will see a place that says shipping.
click on it, a drop down menu will pop out.
Please put your zip code and state in and press calculate.
This will show you the shipping charge before you actually have to pay
AXLE SPECIFICATIONS:
Hub Face: 85"
Spring Center: 70"
Bolt Pattern: 5x4.5
4" Drop Axle
Axle Brand: Rockwell American
Country Assembled: The U.S.A.
Capacity Per Axle (LBS): 3,500
Stud Size: 1/2"
Hubs: 5 Lug Idler Hubs
Spindles: #84
Spindle Size: 1-1/16"
Axle Tubing Diameter (Inch): 2 3/8"
Axle Tubing Thickness: .180"
Lubrication: EZ-Grease Zerks in Spindles
Spring Pads: Welded on Axle
Brake Flange: 4 Bolt Welded on Axle
Pre-Greased: Yes
Inner Bearing: L68149
Outer Bearing: L44649
Suspension: Leaf Spring
Cambered: Yes
Under-slung: Yes (the axle sits on top of the springs)
FULLY ASSEMBLED, READY TO INSTALL ON TRAILER.
Bearing, Race, and Seal Information:
Bearings:
Inner Bearing - L68149
Outer Bearing: L44649
Seal: 10-19 EZ-Lube:
1.719" Inner Diameter.
2.565" Outer diameter.
Races
Inner Race: L68111
OUTER RACE: L44610
Grease Cap:
1.98' Outer Diameter - EZ-Lube with Rubber Plug
Spindle: EZ Lube
How to properly measure your axle:
Hub face:
refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle
(when hubs are mounted on the beam).
Spring center:
is the approximate width of your trailer. It is measured from the center of the spring seat on one side of the axle to the center of the seat on the other.
This axle beam comes with the spring seats welded on.
Use the distance between the center of one bolt hole to the center of the bolt hole adjacent to it:
If the distance is:
2-5/8" - the bolt pattern is 5 on 4-1/2
2-3/4" - the bolt pattern is 5 on 4-3/4
3" - the bolt pattern is 5 on 5
3-1/4" - the bolt pattern is 5 on 5-1/2
