Product Description
This 7,000 lb single trailer axle kit makes it very easy to upgrade your existing axles on your trailer. Typically, on most smaller trailer axles, the manufactures use the common 1-3/4" double eye springs. If that is your case, this kit allows you to upgrade to 7000 lb axles without any welding or fabrication. Easily unbolt your current springs and drop the axle, put the new heavier duty springs on the new 7k trailer axle, and bolt back into place. Simple and easy.
Kit Includes:
(1) 7,000 lbs. Electric Brake Trailer Axle 8 lug
(2) 6 leaf 1-3/4” wide Double Eye springs
(1) 3” U-bolt kit (1 kit per axle)
(1) Single axle hanger kit (includes all the weld on hangers,spring bolts and nuts.)
Select from the options above to get what you need today. If you do not see the option you need, give us a call, or fill out a custom axle order form, email or fax it to us for a quote.
Axle Specs & Features:
Axle Brand: Rockwell American
Capacity per Axle: 7,000 lbs
Axle hub Drum - 8 Lug on 8x6.5" bolt pattern
Brakes: 12” x 2” Electric Brake
Axle Beam - 3" Tube 1/4" wall thickness
Axle Hub Cap - Posi Lube Grease (EZ-Lube)
Axle Studs - 9/16"
Replaces Dexter, AL-KO, Hayes,Lippert Axles, and Just about any other brand axle.
Axles come fully assembled
Axles are pre-wired in the axle tube.
Packed with High-Temp Axle Grease.
Posi-Lube / EZ-Lube Design.
Zerk fitting on the spindle uses a rubber plug on the hub cap to grease bearings simply.
Grease your axle without pulling off your whole entire hub.
Underslung – Axle is welded with spring seats on the bottom (Axle sits on top of the springs)
which Allows for lower ride height. For optimal usage, use with double eye springs
High Strength Cambered Steel Axle Tube Construction to ensure Even Tire Wear so the tires will last longer.
Powder coated black.
Slipper Spring Specifications:
6 Leaf 1-3/4" Wide Double Eye Spring 3.5k Cap. 24-7/8" eye to eye.
Measures 1-3/4" wide and 24-7/8" long from eye to eye.
Spring Type: Double Eye
Capacity per spring: 3,500 lbs
Leaves: 6
Eye Bushing Inner Dimension: 9/16"
Arch Height: 3"-3.25"
Spring Eye size: 9/16"
Single Hanger Kit Specs:
Features:
Attaches 2 leaf springs (sold separately) to your trailer frame
Use table below to determine hanger location based on type of leaf springs
Achieves 4" or 4-1/2" clearance between trailer frame and axle, depending on axle size
Includes:
(2) 1-1/2" Tall front hangers
(2) 1-1/4" Tall rear hangers
(4) 3-1/8" Long shackle straps
(6) 3" Long x 9/16" diameter shackle bolts
(6) 9/16" Diameter locknuts
Designed for use on trailers with single, 2,000-lb to 7,000-lb axles
3" U-Bolt kit Includes:
(4) 1/2"-20 x 6.63" L 3" Tube U-bolts.
(8) 1/2"-20 U-bolt nuts.
(2) Tie Plates for 3" Wide Axle Tubing u bolts.
This Kit is all the u-bolts and hardware for one complete axle.
How to properly measure your axle:
Hub Face (HF):
measure from one end of the axle where the lug bolts protrude out from to the other end at the same point. This is the Hub Face.
Spring Center (SC):
Measure from the middle of the spring on one axle to the center of the other spring on the same axle.
There should be about a 15" difference between the Hub Face and the Spring Center measurement. (7-1/2" each side)
How To Measure Your Bolt Pattern:
Shipping:
This item ships on a pallet with a common freight carrier. Please see the shipping policy for more info.
https://trailerpartsunlimited.com/shipping-returns/
We offer discounts for bulk orders and manufacturing discounts.
To calculate shipping, please put items needed into cart. Then click on the cart icon, in the shopping cart you will see a place that says shipping. click on it, a drop down menu will pop out. Please put your zip code and state in and press calculate. This will show you the shipping charge before you actually have to pay
