To calculate shipping,
please put items needed into cart.
Then click on the cart icon, in the shopping cart you will see a place that says shipping. click on it,
a drop down menu will pop out. Please put your zip code and state in and press calculate.
This will show you the shipping charge before you actually have to pay.
(1) 6,000 lbs. Trailer Axle with 6 lug idler hubs
(2) 5 leaf 1-¾” wide double eye springs
(1) 3” U-bolt kit (1 kit per axle)
(1) Single axle hanger kit (includes all the weld on hangers,spring bolts and nuts.)
(2) 15” ST225/75R15 10-Ply Radial LRE Trailer Tires Mounted on Silver Mod 6 Lug Wheels
Select from the options above to get what you need today. If you do not see the option you need, give us a call, or fill out a custom axle order form, email or fax it to us for a quote.
Axle Brand: Trailer Parts Unlimited
Axle hub - 6 lug 5.5" bolt pattern
Brakes: Idler Hubs (No Brakes)
Flange: 5 Bolt Welded on Axle (in case you want to install brakes in the future)
Axle Beam - 3" Tube ¼” wall thickness
Axle Hub Cap - Fast Lube Grease
Axle Studs - 1/2"
Replaces Dexter, AL-KO, Hayes, Lippert Axles, Rockwell American, Hayes, and Just about any other brand axle.
Axles come fully assembled
Packed with High-Temp Axle Grease.
Fast Lube Design.
Zerk fitting on the spindle uses a rubber plug on the hub cap to grease bearings simply.
Grease your axle without pulling off your whole entire hub.
Underslung – Axle is welded with spring seats on the bottom (Axle sits on top of the springs) which Allows for lower ride height. For optimal usage, use with double eye springs
High Strength Cambered Steel Axle Tube Construction to ensure Even Tire Wear so the tires will last longer.
Tire Size: ST225/75R15
Load Index: 117/112
Speed Rating: L
Ply Rating: 10
Load Range: E
Max Load Per Tire: 2,830 lbs
Max Air Pressure (PSI): 80 lbs
Tread Depth: 6.5
Tread Design: WR078
Section Width: 9”
Overall Diameter: 28.2”
Wheel Size: 15" x 6"
Center Bore Hole: 4.28"
Wheel Material: Steel
Bolt Pattern: 6 on 5.5"
Tire comes Mounted & Balanced (by manufacture) on Wheel, aired up ready to install on your trailer.
3000 lb. capacity double eye leaf spring.
Measures 1-3/4" wide and 25.25" long from eye to eye.
Spring Type: Double Eye Leaf Spring
Capacity per spring: 3,000 lbs
Dimensions: 25.25" Long, 1.75" Wide
Spring length eye to eye: 25-1/4"
Spring width: 1-3/4"
Eye Dimension: 9/16"
Arch Height: 3"-3.25"
Spring Eye size: 9/16"
Single Hanger Kit Specs:
(2) 1.44" Tall front hangers,
(2) 1.5" Tall Rear Hangers with bushing,
(4) 3 1/8" Shackle Links
6- Shackle Bolts
6- Lock Nuts
(4) 1/2"-20 x 6.63" L 3" Tube U-bolts.
(8) 1/2"-20 U-bolt nuts.
(2) Tie Plates for 3" Wide Axle Tubing u bolts.
This Kit is all the u-bolts and hardware for one complete axle.
How to properly measure your axle:
Hub Face (HF):
measure from one end of the axle where the lug bolts protrude out from to the other end at the same point. This is the Hub Face.
Spring Center (SC):
Measure from the middle of the spring on one axle to the center of the other spring on the same axle.
There should be about a 15" difference between the Hub Face and the Spring Center measurement. (7-1/2" each side
How To Measure Your Bolt Pattern:
This item ships on a pallet with a common freight carrier. Please see shipping policy for more info.
we offer discounts for bulk orders and manufacture discounts.
To calculate shipping, please put items needed into cart. Then click on the cart icon, in the shopping cart you will see a place that says shipping. click on it, a drop down menu will pop out. Please put your zip code and state in and press calculate. This will show you the shipping charge before you actually have to pay