null

3.5k Rockwell Trailer Axle - 3500 lb Electric Brake 5 Lug

$240.00 - $330.99
(No reviews yet) Write a Review
Shipping:
Calculated at Checkout
AXLE SPECIFICATIONS:
 
Axle Brand: Rockwell American
 
Country Assembled:  The U.S.A.
 
Capacity Per Axle (LBS): 3,500
 
Stud Size: 1/2"
 
Hubs: 5 Lug Brake Hub Drum
 
Spindles: #84
 
Spindle Size: 1-1/16"
 
Axle Tubing Diameter (Inch): 2 3/8"
 
Axle Tubing Thickness: .180"
 
Lubrication: EZ-Grease Zerks in Spindles
 
Spring Pads: Welded on Axle
 
Brake Flange: 4 Bolt Welded on Axle
 
Brakes: 10" x 2" Electric 
 
Pre-wired: Yes
 
Pre-Greased: Yes
 
Inner Bearing: L68149
 
Outer Bearing: L44649
 
Suspension: Leaf Spring
 
Cambered: Yes
 
Under-slungYes (the axle sits on top of the springs)
 
FULLY ASSEMBLED, READY TO INSTALL ON TRAILER.
 
 
 
Bearing, Race, and Seal Information:
 
Bearings:
 
Inner Bearing - L68149
 
Outer Bearing: L44649
 
Seal: 10-19 EZ-Lube:
 
1.719" Inner Diameter.
 
2.565" Outer diameter.
 
Races
 
Inner Race: L68111
 
OUTER RACE: L44610
 
Grease Cap:
 
1.98' Outer Diameter - EZ-Lube with Rubber Plug
 
Spindle: EZ Lube
 
Features:
Axle Beam Acts as part of your trailer Suspension for hauling loads. 
 
Great for replacing an old axle or bent damaged axle on your trailer
 
Made of High Strength Steel
 
Underslung axle design: spring pads are welded to the underside of the axle for mounting leaf springs.
 
Spring pads are pre-welded on the trailer axle for your convenience. 
 
The 5 lug hubs Drums are assembled on the axle with the 10" x 2" Electric Brakes, bearings, seals, pre-greased, fully assembled for simple install on your trailer.
 
Limited 2-year warranty 
 
 
 
Hub face:
refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle 
(when hubs are mounted on the beam).
 
 
 
Spring center:
 is the approximate width of your trailer. It is measured from the center of the spring seat on one side of the axle to the center of the seat on the other. 
This axle beam comes with the spring seats welded on.
 
 
 
Use the distance between the center of one bolt hole to the center of the bolt hole adjacent to it:
If the distance is:
 
2-5/8" - the bolt pattern is 5 on 4-1/2
2-3/4" - the bolt pattern is 5 on 4-3/4
3" - the bolt pattern is 5 on 5
3-1/4" - the bolt pattern is 5 on 5-1/2
 
Product Description:
3.5K Rockwell American 5-lug Electric Brake axle will replace Dexter, Al-Ko, Hayes, and Lippert Axles. 
 
Rockwell axles are powdered coated and made of high-strength steel and come with spindles and spring seats welded on. 
The spring seats are attached to the underside of the axle so that the leaf springs. 
The result of this underslung design is a trailer that rides a bit lower for quick and easy loading and unloading.
 
Each Rockwell axle is manufactured to create a certain camber angle. The camber ensures that the angle of the wheels is correct for your towing needs. 
Because the primary concern when towing is maintaining controlled, in-line movement, each axle is made so that your trailer's tires will run along the pavement evenly, with contact across the width of the tread. The result is excellent straight-line acceleration for steady, in-line tracking. 
 
You might notice the bend near the center of the axle; this is what ensures the proper camber angle. 
Having the center ride a bit higher and the sides of the axle bent lower allows the axle to give just enough to compensate for the load.
 
This Rockwell Axle is fully assembled with the proper Electric Brakes, bearings, seals, hubs drums, greased up ready to install on your trailer
 
Applications:
Cargo Trailer, Lowboy trailer, utility trailer, boat trailer, bbq pit trailer, horse trailer, cattle trailer, dump trailer, car hauler, custom trailer and more.
 
This Rockwell Trailer Axle is available for pick up in Huntsville Texas at Trailer Parts Unlimited's store,
 or we can ship the trailer axle right to your state. Items usually ship out 1 - 3 days after paid for.
Items ship on a pallet with a freight company so we need to ship items to a commercially zoned address with forklift or loading dock.
We can also locate a freight hub for you to pick items up at if you do not have a commercial address.
If you must have items shipped to your house, the freight companies usually charge about $125.00 to do so. 
 
For Wholesale prices, manufactures discounts and general inquires please contact Trailer Parts Unlimited via phone or email.
 
Trailer Parts Unlimited
631 TX 75 N
Huntsville TX 77320
SAVE $$$$$$$$ WHEN YOU PICK UP AT OUR STORE!