To Calculate shipping cost:
Add items into the shopping cart.
Go to VIEW SHOPPING CART,
In the shopping cart you will see a place for shipping.
Put your state and zip code into the box and press calculate.
If it gives you an error just give us a call and we can help you out
(1) 7,000 lbs. Trailer Axle 8 lug Idler Hubs
(2) 5 leaf 2” wide Slipper springs
(1) 3” U-bolt kit (1 kit per axle)
Axle Specs & Features:
Capacity per Axle: 7,000 lbs
Axle hub - 8 Lug on 8x6.5" bolt pattern
Brakes: Idler Hubs 8 lug
Axle Beam - 3" Tube 1/4" wall thickness
Axle Hub Cap - Fast Lube Grease
Axle Studs - 9/16"
Replaces Rockwell American, Dexter, AL-KO, Hayes, Lippert Axles, and Just about any other brand axle.
Axles come fully assembled
Packed with High-Temp Axle Grease.
Fast lube grease.
Grease fitting on the spindle uses a rubber plug on the hub cap to grease bearings simply.
Grease your axle without pulling off your whole entire hub.
Underslung – Axle is welded with spring seats on the bottom (Axle sits on top of the springs)
Slipper Spring Specifications:
5 Leaf 2" Wide Slipper Spring 3.5k Cap. 26-7/8" Free Length
Measures 2" wide and 26-7/8" long from eye to end.
Spring Type: Slipper Spring
Capacity per spring: 3,500 lbs
Eye Dimension: 9/16"
Arch Height: 3"-3.25"
Spring Eye size: 9/16"
3" U-Bolt kit Includes:
(4) 1/2"-20 x 6.63" L 3" Tube U-bolts.
(8) 1/2"-20 U-bolt nuts.
(2) Tie Plates for 3" Wide Axle Tubing u bolts.
This Kit is all the u-bolts and hardware for one complete axle.
How to properly measure your axle:
Hub Face (HF):
measure from one end of the axle where the lug bolts protrude out from to the other end at the same point. This is the Hub Face.
Spring Center (SC):
Measure from the middle of the spring on one axle to the center of the other spring on the same axle.
There should be about a 15" difference between the Hub Face and the Spring Center measurement. (7-1/2" each side)
How To Measure Your Bolt Pattern:
This item ships on a pallet with a common freight carrier. Please see the shipping policy for more info.
We offer discounts for bulk orders and manufacturing discounts.